Seeding Tank High Pressure Chemical Mixing Reactor
Product Description
Fermenter characteristics
1. CIP cleaning and SIP sterilization online (121°C/ 0.1mpa).
2. Designed according to the requirements of hygiene level, the structure design is highly humanized and easy to operate.Smooth transmission, low noise.
3. Suitable diameter-height ratio design, customized stirring device, energy saving, good stirring and fermentation effect.
4. Internal tank surface mirror polishing (roughness Ra≤0.4µM);The opening of the inlet and outlet pipe, sight mirror, manhole and other processes and the welding of the inner tank are all using the stretching flanging process arc transition, smooth and easy to clean without dead Angle, to ensure the reliability and stability of the production process, in line with the "cGMP" and other specifications.
The fermentation process of dairy products and alcohol is aseptic and pollution-free. The fermentation tank adopts aseptic system to avoid and prevent microbial pollution in the air, which greatly extends the shelf life of the product and the purity of the product.
Fermenters are widely used in dairy products, beverage, biological engineering, pharmaceutical, fine chemical industry and other industries. The tank body is provided with interlayer, insulation layer, which can be heated, cooled and insulated.The tank body and the upper and lower filling head (or cone) are processed by spinning R Angle, the inner wall of the tank is polished by mirror, and there is no sanitary dead Angle. The fully closed design ensures that the materials are always mixed and fermented in a pollution-free state. The equipment is equipped with air breathing hole, CIP cleaning nozzle, manhole and other devices.
Fermentation Tank Seeding Tank
Application Scope
➤ Food industry:e
➤ Medicine industry: medical ointment, ointment, lotion, cream, various vitamin, etc.
➤ Chemical industry :concerned with product of daily use: shampoo, detergent, cream, tooth paste, paraffin liquor, hair dye, etc.
➤ Adhesive industry: rubber liquor, polyester sulfured, silicone, hot-melt adhesive, polyurethane, etc.
Fermentation tanks usually are equipped with two sets of agitators. The distance between the two sets of agitators (S) is about three times as the diameter of the agitator. For large-scale fermentation tanks or those that have high liquid depth (HL), they can install three or more sets of agitators. It will be better if the agitator at the bottom is close to the exit of air dust, and the distance to the bottom of the tank (C) equals to the diameter of the agitator (Di), but could not be less than 0.8 times of Di, otherwise it will affect the cycle of liquid.
Technical parameters of fermentation tank
| Nominal Volume (m³) | Diameter of internal tank (mm) | Mixing shaft rotational speed (rpm) | Mixing shaft power (kw) |
| 10 | 1800 | 160-260 | 17-22 |
| 15 | 2000 | 160-260 | 20-30 |
| ... | ... | ... | ... |
| 200 | 4600 | 140-240 | 215-360 |
Technical parameters of fermenting and seeding tank
| NominalVolume (m³) | Diameter of internal tank(mm) | Inner tank height (mm) | Mixing shaft rotational speed(rpm) | Mixing shaft power (kw) |
| 0.05 | 300 | 700 | 300-350 | 0.55 |
| 0.1 | 400 | 800 | 300-350 | 0.75-1.1 |
| 0.2 | 500 | 1000 | 280-340 | 0.75-1.5 |
| ... | ... | ... | ... | ... |
| 5.0 | 1400 | 3200 | 180-220 | 7.5-18.5 |
3 
Product Categories : Stainless Steel Reactor > Biological Fermentation Tank